Bennett 3000 Series Operation Manual page 33

MENU CODE 12 CONTINUED
3.18.3 IDLE TIMEOUT
Idle Timeout determines the number of seconds a dispenser will hold the previous input (i.e., the nozzle
handle is lifted, a grade select button is pressed, etc.) before returning to its Idle State.
Keypad Retail Display
Action
Enter
0-9
3.18.4 HANDLE STATE
Setting the Handle State time will run all tank pumps simultaneously for the number of seconds desired.
Sites with infrequent use may benefit from this feature so that all hoses are pressure charged whenever
any of them is used.
Keypad Retail Display
Action
Enter
H A N d L E
H A N d L E
0-9
Cancel
3000 Series Operation Manual
Volume Only
Results Display Results
I d L E I d L E 3 0
3 0
I d l E
I d L E 3 0
3 0
Volume Only
Results Display Results
H N S t E 0 0
S t E 0 0
H N S t E 0 0
S t E 9 9
C O d E
C O d E 0 0
0 0
Lower PPV
Display Results
C O d E
C O d E
Lower PPV
Display Results
C O d E
C O d E
S i d E -
Back to TOC
Setup and Programming
Description
Last Sale Timeout default
is 30 seconds.
Key in a new time,
99 Seconds is the
maximum.
Description
Default setting is 0.
Key in a new time, 99
seconds is the maximum.
Exit Menu Code
29