Setup And Programming; Full Menu Code List - Bennett 3000 Series Operation Manual

3 SETUP AND PROGRAMMING

Menu Codes are accessed with the Manager's Keypad (or the Local Preset Keypad, refer to Appendix B).
Menu Codes 0, 1, and 2 are diagnostic error codes or totals. To access menu codes 4 - 99, follow the
keypad sequence in Section 3.5 Manager's Access.
IMPORTANT: Hang up all nozzles to gain access to programming.
3.1

FULL MENU CODE LIST

Access Types:
• Keypad: Data can be directly entered
• Passcode: The passcode is required, see Section 3.5 Manager's Access
• Cal Switch: Setting the calibration switch to the unsealed position is required, see Section 3.29
Menu Code 27.
Menu
Name
Code
0 Diagnostics
1 Hose Totals
2 Totalizer Totals
3 Manager Access
4 Pricing
5 Totalizer Value
6 Programming
Dispenser
7
Configuration
8 Decimal Location
9 No Flow Time Out
10 Slow Flow Amount
11 Volume Allocation
12 Pre-Charge Time
14 Price Display
15 Fleet Option
Local Preset -
17
Operation
Motor Delay – Suction
18
Pump Units Only
19 Door Sensor
20 Masked Volume
3000 Series Operation Manual
Access
Description
Type
Keypad Diagnostic Tests
Keypad Displays money, volume, amounts of sales, and price changes.
Keypad Display electronic totalizer totals only.
Keypad Access code to access codes 4 and higher = 2218.
Passcode Set price per volume for each hose and one or two-tier pricing.
Passcode Enter a value for each electronic totalizer (volume total).
Passcode Review and program the most common code settings.
Passcode Set the number of sides and number of grades.
Passcode Change decimal placement for other than U.S. standard.
Passcode Set a time for the dispenser to turn off after flow stops.
Passcode Control the slowdown limit of a prepay sale.
Passcode Control maximum volume of a single sale at one pump.
Passcode Set the submerged pump pre-charge time.
Passcode Set the way price displays operate.
Passcode Set the fleet system interface compatibility.
Passcode 0 = No Preset
Cal Switch 0 = No Delay
Enable/disable the door sensors.
Cal Switch
Cal Switch .010 gallons or .10 liters
Back to TOC
Setup and Programming
10