Alue - Bennett 3000 Series Operation Manual

3.11 MENU CODE 5: TOTALIZER VALUE
Totalizer values are meter volume totals. When the 719 Control Board is replaced, the value from the
previous Control Board or the value shown on the mechanical totalizer (if equipped) can be loaded in
Menu Code 05. This value can be adjusted and reset at any time. To enter a new value for the meter
totals, follow this procedure:
• Passcode is required to access this menu, see Section
Keypad Retail Display
Action
5, Mode Volume Amount
Type new
New Volume
volume
Enter New Volume
Cancel
NOTE: If monthly, weekly, or daily totals are logged, simply record the required totals, and enter "0" in
the steps above to reset the totals at the end of the designated time period.
3000 Series Operation Manual
Volume Only
Results Display Results
Volume Amount
New Volume
New Volume
C O d E
C O d E 0 0
00
Back to TOC
Setup and Programming
3.4 Menu Code 3: Manager
Lower PPV
Display Results
•
•
T 1 . 5
T 2 . 5
•
Type a new meter volume
T 1 . 5
to overwrite the previous
T 2 . 5
T 1 . 5
T 2 . 5
S i d E -
Access.
Description
t1.5 defined:
t = Totalizer totals.
1,2, product meter
represented. Press
Enter to cycle, if
applicable.
.5 = Menu Code 5
volume.
Enter to save
Exit
21