Configuration - Bennett 3000 Series Operation Manual

3.13 MENU CODE 7: DISPENSER CONFIGURATION
NOTE: If programming a two-sided dispenser, changing one side will automatically change the second
side to the same value as the first.
To program dispenser configuration, follow this procedure:
1. Passcode is required to access this menu, see
2. Press 7, Mode, and Enter. Continue to select Enter to cycle through each step. See steps
below.
3. To change a setting press the number that matches the installation, and press Enter to save
and move to the next step.
4. Press Cancel to exit mode 7.
3.13.1 KEYPAD STEPS IN MENU CODE 7
1. Type of Dispenser: Default: Type 3000
2. Number of Sides
1 = 1 Side
2 = 2 Sides
3. Number of Grades
1 = 1 Grade
2 = 2 Grades
3.13.2 CONFIGURATIONS
Name
Single Product
One Side
Single Product
Two Sides
Two Product
Two Sides
1 – Standard Flow
Quad
2 – High Flow
Active Quad
3000 Series Operation Manual
719 Control
Side(s)
Board(s)
1
1
1
2
Back to TOC
Section 3.4 Menu Code 3: Manager's Access.
4. Number of Hoses
1 = 1 Hose
2 = 2 Hoses
5. Number of Tiers
1 = 1 Tier
2 = 2 Tiers
Grades (Number of
Products)
1 1
2 1
2 2
2 2
2 2
Setup and Programming
Hose(s)
1
1
1
1
1
23