Installing A Sata Hard Drive - Nexcom VTC 1031 Series User Manual

Chapter 4: System Setup

Installing a SATA Hard Drive

1. Align the hard drive's mounting holes with the mounting holes on the
hard drive bracket, and use the provided screws to secure the both sides
of hard drive in place.
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
2. Slide the hard drive into the connector. Be sure to connect it with the
appropriate orientation because of the foolproof design of the connec-
tor.
59
VTC 1031 and nROK 1031 Series User Manual