Installing A Sata Hard Drive - Nexcom NISE 104 User Manual

Chapter 3: System Setup

Installing a SATA Hard Drive

1.The inner side of the bottom cover is where you will install the SATA drive.
Align the mounting holes of the SATA drive with the mounting holes on the
cover.
SATA Drive
Inner Side of the Cover
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved.
2.While supporting the SATA drive, turn the cover to the other side. This will
be the outer side of the cover. Use the provided screws to secure the drive
in place.
Cover
32
Outer Side of the Cover
NISE 104 User Manual