Nexcom VTC 1031 Series User Manual page 25

Chapter 1: Product Introduction
nROK 1031/1031-C2
CPU
▪ Intel Atom
x6413E quad-core processor, 1.5GHz, TDP 9W
®
Memory
▪ 1 x 260-pin DDR4 SO-DIMM socket support 3200MHz up to 32GB.
Default 2666MHz, 4GB
▪ With In-Band ECC (IBECC)
Video Output
▪ 1 x HDMI 1.4b up to 3840 x 2160@30Hz
▪ 1 x VGA port 1920 x 1200@60Hz
Storage
▪ 1 x 2.5" SATA 3.0 internal drive bay (9.5mm)
▪ 1 x M.2 2280 Key M for SATA 3.0
Expansion
▪ 1 x Full size mini-PCIe socket (USB 2.0, PCIe 3.0), BOM optional M.2 3042
Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G NR module with 1 x
internal micro-SIM and 1 x external micro-SIM
▪ 1 x M.2 2230 Key E socket (USB 2.0, PCIe 3.0 x2), BOM optional M.2 2230
Key E socket (USB 2.0, PCIe 3.0, PCIe 3.0)
▪ 1 x M.2 3042/3050/3052 Key B socket (USB 2.0, USB 3.2 Gen 2) for LTE/5G
NR module with 1 x internal micro-SIM and 1 x external micro-SIM
GNSS and Onboard Sensor
▪ 1 x Default U-blox NEO-M9N GNSS module for GPS+QZSS/Glonass/
Galileo/Beidou
▪ 1 x 3D accelerometer and 3D gyroscope
Copyright © 2023 NEXCOM International Co., Ltd. All Rights Reserved.
LAN and Power over Ethernet
▪ 1-Port LAN M12 X-coded, 10/100/1000/2500 Mbps Ethernet, Intel
Ethernet Controller I225-IT (support WOL)
▪ 1-Port LAN M12 X-coded, 10/100/1000 Mbps Ethernet, Marvell Ethernet
PHY 88E1512
▪ 2-Port LAN M12 X-coded, 10/100/1000/2500 Mbps Ethernet, PoE
802.3af/at, max 60W, isolation (nROK 1031-C2)
Security
▪ TPM 2.0: Infineon SLB9670VQ2.0 FW7.62
I/O Interface-Front
▪ 6 x LED indicators (including 1 x programmable LED)
▪ 1 x USB 3.2 Gen 2 type A (5V/0.9A)
▪ 1 x USB 2.0 type A (5V/0.5A)
▪ 1 x Externally accessible micro-SIM card sockets with cover
▪ 1 x Reset button
▪ 1 x Power button
▪ 1 x DB9 (COM) for full RS232/422/485
▪ 1 x DB9 (Audio) for 1 x Mic-in, 1 x Line-out
▪ 1 x DB9 for Expansion Port (optional)
▪ 2 x M12 X-coded PoE, including 2 x PoE LED light (nROK 1031-C2)
▪ 4 x SMA connector holes for WWAN (nROK 1031)
I/O Interface-Rear
▪ 1 x HDMI
▪ 1 x VGA
▪ 1 x LAN (LAN1) M12 X-coded, 10/100/1000/2500 Mbps
▪ 1 x LAN (LAN2) M12 X-coded, 10/100/1000 Mbps
▪ 1 x M12 A-coded 8-pin for 2 x USB 2.0 (5V/0.5A)
▪ 1 x DB26 (Multi Port)
9
®
VTC 1031 and nROK 1031 Series User Manual