Powering On The Projector - Christie APS Series User Manual

LWU505ST-APS
Vertical 360°

Powering on the projector

To use the projector correctly and prevent unnecessary risks, complete the following steps.
Notice. If not avoided, the following could result in property damage.
1. Connect all external equipment to the projector (for example, computer or camera) before powering
on.
2. Connect the AC power cord of the projector to an AC power socket.
The Power indicator turns on in orange.
Standby mode:
3. Select Power on the top control panel or the remote control.
The LWU605ST-APS POWER indicator flashes orange and a blue background appears on the screen.
The countdown begins until the POWER indicator is bule and the LIGHT indicator is green. The cooling
fan is starting working.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
• If the Splash Screen Select function is disabled, the splash screen is not displayed on the
screen.
• During the countdown, all operations other than shutdown are disabled.
• If the LIGHT indicator is always on or flashes depends on the different laser modes. For
details, refer to Indicator status on page 23
Horizontal 360°
Installation and setup
Vertical & Horizontal 360°
20