Hdmi Setup - Christie APS Series User Manual

• Volume— Select
Select
• Mute— Select
•
•

HDMI setup

When the external device is connected to the HDMI1/HDMI2 terminal of the projector and the images cannot
be projected normally, switch on the Image setting. When the sound cannot be output normally, switch on the
Audio input setting.
• HDMI option can be chosen only in HDMI 1 and HDMI 2 channel.
1. Select to select the HDMI setup menu.
2. Select OK.
HDMI Setup is immediately displayed..
3. Select to switch required menu.
Image
Adjust the projector's image setting if images can not project properly when connecting to the HDMI 1/HDMI 2
terminal.
• The optimal settings for projectors vary depending on the external device output connected to
the projector.
• For external output, refer to the instructions for use of the external device.
1. Select to select the Image menu.
2. Select OK.
3. Select to switch required menu.
• Auto—Set automatically in the standard signal.
• 64-940/0-1023—Under non-standard signal, if the image is abnormal, manually switch until
the image is normal.
Sound
Adjust the projector's audio input setting if the sound can not project properly when connecting to the HDMI
1/HDMI 2 terminal.
1. Select to select the Sound menu.
2. Select OK.
3. Select to switch required menu.
• HDMI—When connect to the HDMI cable to tansmite images and audio when users do not
need to connect to audio signal separately.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
to increase volume (range: 0 to 25).
to decrease volume (range: 0 to 25).
to switch the Mute function on or off.
On: No audio output
Off: Audio output
Menu items
43