Powering The Projector On/Off; Powering On The Projector - Christie Captiva Series User Manual

Hide thumbs Also See for Captiva Series:

Table of Contents

Powering the projector on/off

Learn how to turn on or off the projector.

To turn on the projector, do the following:

1. Securely connect the power cord and signal cable.

When connected, the Power LED turns red.

2. Turn on the projector by pressing the

remote keypad.

The Power LED turns blue. The startup screen displays in approximately five seconds.

3. The first time you use the projector, you are asked to select the preferred language and power

saving mode.

4. Turn on and connect the source you want to display on the screen (computer, notebook, video

player, and so on).

The projector detects the source automatically. If not, press MENU and go to Options.

• If connecting multiple sources at the same time, press INPUT on the built-in keypad or direct

source keys on the IR remote keypad to switch between inputs.

• When the power mode is in Standby mode (power consumption < 0.5W), the VGA output/input

and audio are deactivated when the projector is in standby.

DWU500S User Manual

020-001919-01 Rev. 1 (06-2021)

button either on the built-in keypad or on the IR

Installation

Table of Contents

Dwu500s