Auto Setup; Keystone - Christie APS Series User Manual

Auto setup

Select AUTO on your remote control to execute the following functions: Input search and Auto PC adj.
• When Input Source Search is enabled, the projector performs the automatic search function
during start up.
• When the Auto PC adj. is disabled, the AUTO button on the remote controller is not available.
• If the Auto keystone function is selected, you must adjust the projector manually when the
image appears abnormal.
• When Project way is set to Auto Ceiling/Front or Auto Ceiling/Rear, the Auto Keystone function
do not work in the ceiling state.
• When enabling Auto search, this funciton is invaild if USB-A, Network or USB display is selected
as signals.
• The input search function does not support BNC to VGA signal input.
1. Select to select the Auto setup menu.
2. Select OK.
3. Select to select required items.
• Input search—Select this function to detect the signal, then project images and input signals
automatically.
• Auto PC adj.—Select this function to adjust Fine sync, H Position, V Position and H Size
automatically, when projector input analog signals.
• Auto keystone—Select this function to correct distortion of the projected image
automatically.

Keystone

Select this function to store or reset the keystone or related setting after unplugging the AC power.
1. Select to select the Keystone menu.
2. Select OK.
3. Select to select required item.
4. Select OK.
Keystone
Select this function to store and reset Keystone after closing the projector or unplugging the AC power .
• Store—Stores the Keystone after closing the projector or unplugging the AC power cord .
• Reset value—Cancels the Keystone after closing the projector or unplugging the AC power.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Menu items
45