Direct Power On; Standby Mode; High Land - Christie APS Series User Manual

4. Select to set options.

Direct power on

Enable the power mode, when the power cord is connected to a power outlet.
• After the power is turned off, wait approximately 20 seconds after unplugging the power cord
before turning on the power. If the power is turned on immediately, the projector may not work
properly.
1. Select to select the Direct power on menu.
2. Select OK.
3. Select to select required item.
• Off—Get into Standby mode.
• On—After entering the standby mode, select Power to power on.

Standby mode

Set a different power consumption during standby when the projector is operated through the network.
1. Select to select the Standby mode menu.
2. Select OK.
3. Select to select required item.
• ECO mode
• Network
• Normal

High land

The projector provides fan control through the Settings menu. Change the setting to control the speed of the
cooling fan according to the altitude the projector is operating at.
• The air pressure sensor senses the altitude automatically. When the altitude is 1700 m (5577.4
feet) or higher, the projector turns on the high land function automatically, so the High land
screen menu changes to On.
• If the air pressure sensor is damaged, the on-screen display (OSD) menu turns red to indicate
the automatic transfer to high land function is invalid. You can manually enable the High land
feature.
• When the altitude is over 2600 m (8530.2 feet), the projector automatically reduces the
brightness to protect the product.
• The projector can be used at 3000 m (9842.5 feet). Over this altitude, the projector
automatically reduces the brightness to protect the product automatically.
1. Select to select the High land menu.
2. Select OK.
3. Select to select required menu.
• Off—Normal speed. Set this option when operating the projector in lower alitutdes.
• On—Faster speed. Set this option when operating the projector in high altitudes.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Menu items
40