Input Selection - Christie APS Series User Manual

Input selection

Select the INPUT button on the top control panel or on the remote control to select one of the following input:
VGA, HDMI1, HDMI2, Video (only LWU505ST-APS), Memory viewer, Network and USB Display as input signal.
• If the Input Source Search option in the Auto Setting function is enabled, the VGA, HDMI 1,
VIDEO, and HDMI 2 input sources support the automatic search function. When a signal line is
connected, the projector automatically switches the corresponding signal source. In VGA signal
mode, when the Auto PC adj option is enabled, select AUTO and the projector performs the Auto
PC adj function.
• When selecting USB Display, Memory Viewer and Network as the input source, the Freeze,
Aspect, Auto setup, and Test pattern functions are disabled.
1. Select the INPUT button on remote control to enter the Input menu.
2. Select to select the required item.
3. Select OK to select the input signal.
LWU605ST-APS
• VGA—Selects input VGA if a PC is connected to the VGA IN terminal.
• HDMI1—Selects input HDMI 1 if a device is connected to the HDMI 1 terminal.
• HDMI2—Selects input HDMI 2 if a device is connected to the HDMI 2 terminal.
• Video—Selects Video when the video input signal is connected to the VIDEO terminal using a
BNC cable (only LWU505ST-APS).
• Memory Viewer—Selects input Memory Viewer if a device is connected to the USB-A
terminal. For more details, see Memory Viewer function on page 72.
• Network—Selects input Network if a device is connected to the LAN terminal.
• USB Display—Selects input USB Display if a device is connected to the USB-B terminal. For
more details, see USB Display function on page 73.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
LWU505ST-APS
32