Menu Position; Background Display; System - Christie APS Series User Manual

• Auto ceiling/Rear—Projector is projected in rear of the screen.

Menu position

Select this function to set the Menu position .
1. Select to select the Menu position menu.
2. Select OK.
3. Select to change menu position.
• Upper left—Displays the menu on the upper left corner of the screen.
• Center—Displays the menu in the center of the screen.
• Lower left—Displays the menu on the lower left corner of the screen.
• Lower right—Displays the menu on the lower right corner of the screen.

Background display

Select this function to adjust background color.
• This function is invalid once you select the input signal as USB Display, Memory Viewer, and
Network.
1. Select to selec thet Background display menu.
2. Select OK.
3. Select to select required item .
• Blue—The entire projection area display blue.
• Black—The entire projection area display black.

System

The scanning system and auto computer adjustment function may detect scores of signal format. If a PC is
selected as the input signal source, the projector detects and adapts to its signal format automatically. The
correct image can be displayed without any setup operation.
• The projector may hold data generated by the Auto PC adj. function.
• The system (signal format) is available only when the input signal is Video or VGA. the function
is unavailable for other input signals and the menu is grey.
1. Select to select the System menu.
2. Select OK.
3. Select the Point
4. Select OK.
5. Select to select required item .
VGA Signal Input
The projector can display one of the following:
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
to select your required system signal format.
Menu items
36