Projecting The Usb Display; Terminating The Usb Display - Christie APS Series User Manual

When using Windows:
Windows operating environment
Operating system
CPU
Memory capacity
Disk space available
Monitor
• Christie does not guarantee a PC not meeting the above conditions will operate normally.

Projecting the USB display

1. UseUSB-B cable to connect the projector to the USB-B terminals.
Items in grey are not available.
2. Select the information source menu on the remote control
3. Selectthe INPUT button on the control panel.
4. Select USB display in the input source menu.
5. Select the driver icon in the computer drive in the computer's task bar
the menu bar.
The menu only displays in English.
• Christie does not guarantee a PC not meeting the above conditions will operate normally.
• If the drive is not installed on the computer, the driver is removed when the USB cable is
disconnected .
• You must wait for a 7 seconds before you can project computer screen.
• Connect the USB cable directly to the computer's USB connector. When connecting the USB
hub, it may be abnormal.

Terminating the USB display

The following provides the USB display requirements for the MAC OS operating environment.
Operating system
CPU
Memory capacity
Disk space available
Monitor
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Vista Windows 32, 32/64 Windows7, Windows 8 32/64
Intel core 2 duo 2.0 ghz or faster compatible processors
256 MB or above (512 MB or above)
20 MB or above
Resolution 640x480 or above, 1600x1200 or above
MAC OS x 10.5, 10.6,10.7
Power PC g4 1GHz or faster compatible processors
512 MB or above
20 MB or above
Resolution 640x480 or above, 1600x1200 or above
Memory Viewer function
and then select the item in
74