Christie APS Series User Manual page 51

PIN Code lock
This function helps preventing unauthorized personnel from operating the projector.
• Off—The projector can be operated without lock and password.
• On—The PIN code screen appears when the projector is on. To change the PIN code lock (for three
digits), you must enter the correct PIN code. The factory default PIN code is 111.
Canceling the passcode.
Follow these steps to cancel the passcode.
1. While selecting POWER and OK on the projector for several seconds simultaneously, plug the power
cord into power port.
The PIN code screen appears.
2. Enter 111.
3. Select Security > PIN code lock > On.
4. When the PIN code screen appears again, enter the default password (111) and set the PIN code lock
to Off or set a new pass code.
PIN code change
This function helps to prevent unauthorized personnel from operating the projector.
1. Select to select the PIN code change menu.
2. Select OK.
3. At the PIN code dialog prompts, select
4. Set a new PIN Code.
You can change the password to the three numbers you want. The cursor automatically moves to Set.
5. Select OK to confirm.
Remember your new password and keep it protected.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
to give a valid new code.
Menu items
51