Christie APS Series User Manual page 71

3. Select app to enter the PwPresenter software.
①
ID Part name
①
Search network projector
②
Screenshot start or pause
③
Select screenshot mode
④
Parameter Setting
Network Projector
⑤
Management
----------
⑥
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
②
③ ④
Description
Select to enter to search, select the needed projector and connect it . Set the
same IP address (for example: 192.168.1.100) as the projector in
pwPresenter software, and set user type as average user, and the password
is admin.
Start or pause the selected pictures
Select screenshot mode from the full range, fixed size or variable size.
Basic setting: Includes Language, Capture region size, and so on
Advanced setting: Includes JPEG image setting, Network port setting, White
list and Black list, and so on.
Global setting: Includes Remote control setting, Sound capture and Screen
capture, and so on
Multicast setting: Includes Volume setting, Bandwidth, Sampling frequency,
and so on.
Set pwPresenter network user name and password, and so on.
Cut off the projector connection.
• Before using the pwPresenter search, switch to network signal source.
⑥
⑤
Network control operation
71