Placing The Projector Correctly; Air Ventilation - Christie APS Series User Manual

11 D.ZOOM -
12 VOLUME +
13 VOLUME -
14 VIDEO
15 HDMI
16 MENU
17 OK
18 FREEZE
19 PATTERN
20 INFO.
21 MUTE
22 BLANK
23 TIMER

Placing the projector correctly

Use your projector at specified location in correct way. Invalid projector location may shorten light source's
lifecycle or even lead to severe incidents or fire.

Air ventilation

Openings in the casing are designed for ventilation and overheating prevention. Do not block or cover these
openings to keep the projector in normal operation and from overheating.
Caution! If not avoided, the following could result in minor or moderate injury.
• Do not place flammable materials or sprayers near the projector.
• Keep the air outlet one meter away from other objects.
• Do not touch the area close to the air outlet, especially the metal components (for example, screws). This
area and parts get hot once the projector starts operating.
• Do not place any object atop the projector as they may be damaged but also lead to fire after being
overheated.
Fans are designed to cool the projector. Fan speed is auto adjusted subject to internal temperature of the
projector.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Zooms out projected image .
Increases volume.
Decreases volume .
Invalid. Select to display X on the screen (only LWU605ST-APS).
Selects HDMI 1/HDMI 2 input source.
Opens or closes the on-screen display (OSD) menu .
Enters the on-screen display (OSD) menu or select options in it .
Freezes projected images.
Selects built-in test pattern of the projector. Invalid when you choose USB
Display, Memory Viewer, and Network as the input signal.
Displays current status info. of the projector .
Turns off the sound temporarily.
Blacks out screen images temporarily.
Enables the timer function .
Installation and setup
18