Contrast Optimization(Only Lwu605St-Aps); Laser Control; Sound - Christie APS Series User Manual

• Remote control—Remote control keypad is invalid.

Contrast optimization(Only LWU605ST-APS)

Select this function to optimize and compensate signal automatically on the basis of the image, to get the best
contrast image.
• If the Closed caption function is invaild, this option displays grey.
• When the on-screen display (OSD) menu and Timer display on the screen, the Closed caption
function is invalid.
1. Select to select the Contrast optimization menu.
2. Select OK.
3. Select to adjust.
• Off—No optimization.
• On—Optimize contrast.

Laser control

Changes light source brightness according to the projector's operating environment and aim.
1. Select to select the Laser control menu.
2. Select OK.
3. Select to switch required menu.
Light source mode
Adjust the projector's energy saving settings and brightness during the projection.
• Normal—Normal brightness.
• ECO.1/ECO.2—Lower the brightness and reduce energy consumption, prolonging the light
source service life.
• Full normal—Brightness is the same as normal mode but is not adjustable.
Laser adjust
This function is mainly used to fine-tune projector's brightness. The adjustable range is from 50% to 100%.
When the value is set to 100%, the brightness is equivalent to the normal mode.
• The Laser adjust function can be chosen only in Normal mode.

Sound

Select this function to adjust the sound.
1. Select to select the Sound menu.
2. Select OK.
3. Select to switch required menu.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Menu items
42