Entering A Password (Pin) - Christie APS Series User Manual

LWU605ST-APS Turn on the projector mode:
The LWU505ST-APS POWER indicator flashes orange and a blue background appears on the screen.
The countdown begins until the POWER indicator and the LIGHT indicator turn green. The cooling fan
is starting working.
LWU505ST-APS Turn on the projector mode:
If the projector is password protected, the password dialog displays.
4. Enter your password.
For more details, see Entering a password (PIN) on page21.

Entering a password (PIN)

A password (PIN) is an ID code for identifying people who can operate the projector. A password (PIN) setting
may help preventing the projector from unauthorized use.
• A password (PIN) is an ID code for identifying people with knowledge about it to operate your projector. A
password (PIN) setting may help prevent unauthorized use.
• The password consists of a three-digit number. For instructions on how to use a password to lock the projector, see
the Security feature in the
• You cannot operate a password (PIN) protected projector without the correct password (PIN). Set up a new
password (PIN) and keep the User manual in safe place. If the password (PIN) is lost or forgotten, contact your
dealer or service center.
1. Select ◀ ▶ to select a number.
2. Select ▶ to enter it and move the cursor.
The number typed is displayed as a space.
3. To edit the number you entered, select the ◀ to move the cursor to the number you want to change
and select ▲▼ to select the correct one.
4. Repeat steps 1 to 3 to enter a three-digit number.
5. Move the cursor to set after typing the three-digit number.
6. To now use the projector, select the button.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Expand menu on page 50.
Installation and setup
21