Christie APS Series User Manual page 46

H/V Keystone
Select this function to correct the projected images horizontally or vertically.

Select to reduce bottom
width
4-Conner correction
Select this function to correct the projected images of four corners distorted.
Upper left Upper right
6-Conner correction
Select this function to correct the projected images of four corners distorted.
Upper left Upper right
Curved correction
Select this function to correct the projected images with linearity uneven or vertical and horizontal bending
deformation.
• After adjusting values about H/V Keystone , if users adjust Conner correction, values for H/V
Keystone are reset . After adjusting values about Conner correction, if users adjust for H/V
Keystone, values about Conner correction are also reset.
• Curved correction X compensation and Curved correction Y compensation cannot be adjusted
individually. Adjust Curved correction X compensation and Curved correction Y compensation
after adjusting the X/Y Curved correction.
• LWU605ST-APS Maximum Keystone range is up to ±15° vertically and ±15° horizontally.
LWU505ST-APS Maximum Keystone range is up to ±15° vertically and ±15° horizontally.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.

Select to reduce top
width
Conner correction
Bottom left
Conner correction
Upper middle

Select to reduce left
width
Bottom right
Bottom middle Bottom left
Menu items

Select to reduce right
width
Bottom right
46