Playing the image
Only one image shows on the screen when you play it.
1. Select
to select a file.
2. Select OK or
Full screen display
3. Select OK.
Select OK to return the thumbnail.
Playing the slide
The Slide Show Mode in the Memory Viewer menu is set to Slide down or Slide right, all images in the same
folder can play automatically.
1. Select
to select a file.
2. Select
to select the Memory Viewer menu.
3. Select the From Scratch menu.
4. Select OK.
•
Full screen display
•
Select OK to return the thumbnail.
Playing the video
Follow these steps to play the video.
1. Select
to select a file.
2. Select OK.
•
Full screen display
•
Use the remote control to operate the control appearing at the bottom of the screen.
Terminating the Memory Viewer
When the Slide Show Mode in the Memory Viewer menu is set to a special setting, all images in the same
folder can play automatically.
1. Select
to select
2. Select OK.
Select RC ENTER to display standby screen instanly.
3. Unplug the USB memory directly.
USB display function
Select this function to can project the image and audio from the computer through the USB converter cable.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright
2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
.
, displayed in the left-hand corner of the screen.
Memory Viewer function
73