Christie APS Series User Manual page 30

• Use the adjustment pad to raise the projector up to one degree (illustrated below).
LWU605ST-APS
LWU505ST-APS
• Rotate the adjustable pad and tilt the projector to the required height whose max height is up
to 18 mm/0.3 inches (illustrated below).
• Turn the pad to tilt the projector to required height (illustrated below). Turn both pads
clockwise to raise the projector, while turning both pads counterclockwise to lower the
projector or close the pad.
LWU605ST-APS
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Max angle 3.5°
Max angle 3.5°
18mm
Adjusting the size and position
30