Projecting The Usb Display; Terminating The Usb Display - Christie APS Series User Manual

• Christie does not guarantee a PC not meeting the above conditions will operate normally.

Projecting the USB display

Follow these steps to project the USB display.
• Resolution of the computer screen is switched.
• You must wait for a few seconds if you want to project computer screen.
• Connect the USB cable directly to the computer's USB connector. When connecting the USB
hub, it may be abnormal.
1. Use a USB-B cable to connect the projector to the USB display terminals.
Items in grey are not available.
2. Select the information source menu on the remote control .
3. Select the INPUT button on the control panel.
4. Select the USB Monitor in the input source menu.
5. Doubleclick the Monitor.app button installed on the virtual disk.
This projects the image on the computer screen.
6. Select the driver icon in the computer drive in the computer's task bar
the menu bar.
When using a MAC OS other than Chinese, the menu is displayed in English.

Terminating the USB display

1. Remove the USB cable directly toterminate the USB display.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Memory Viewer function
and then select the item in
75