Christie APS Series User Manual page 68

ID Part name
1 Enter old password
2 Enter new password
3 Confirm new password
4 Apply
5 Power
6 Source select
Picture setup page
The following shows the Picture setup page.
ID Part name
1 Brightness
2 Contrast
3 Sharpness
4 Color Temperature
Image Setup page
The following shows the Image setup page.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Description
Enter the password for the configuration.
Enter a new password.
Re-enter the new password to confirm.
Update settings.
Switch on the power of the projector On and Off.
Switch the input source of the projector.
Description
Adjust the brightness of the projected image.
Adjust the contrast of the projected image.
Adjust the sharpness of the projected image.
Adjust the color temperature of the projected image.
Network control operation
1
2
3
4
68