Pwpresenter Software - Christie APS Series User Manual

ID Part name
1 Network Setup
2 Apply
3 Crestron control
4 Send
Password Enable or
5
Password Disable
6 Input password
7 Confirm password
8 Apply

pwPresenter software

To ensure successful access pwPresenter software, follow these steps
1. Enter the projector's wireless SSID/ESSID address in the address bar of your web browser:
172.28.120.1.
Find the SSID/ESSID address for the Network information in the menu.
2. After entering the IP address of the projector in the web page to the main interface, select Download
and download the corresponding PwPresenter software for the projector.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Description
To enable the DHCP client, select the IP address automatically
IP address: Enter the IP address when you do not use the DHCP server.
Subnet : Enter a subnet shield,when you do not use the DHCP server.
Gateway: Enter the gateway, when you do not use the DHCP server.
DNS: Enter the DNS address, when you do not use the DHCP server.
Available characters: digital (0 to 9) and a period (.) (For example:
192.168.0.253)
Details for each setting, please contact your network administrator.
Update settings.
IP address: Set IP address.
IP ID: Set IP ID.
PORT: Set the port number.
Update crestron setup.
To ennable PJLink settings, enable the Password Enable option and enter the
password.
Input the PJLink password.
Enter the PJLink password again and confirm.
Update PJLink Setup settings.
Network control operation
1
2
3
4
5
6/7
8
70