Christie APS Series User Manual page 37

• (Display example) 1024x768, 60 Hz—Displays the name of the corresponding input signal.
• Auto—If the projector failed to identify signals not shown in the signals format table, the Auto
message displays in the System Signal Format menu. The Auto PC Adjusting function makes
necessary adjustments to the projector to project valid images. If images are displayed
incorrectly, adjust it manually.
• Dashes (-----)—No PC signals detected. Check the connection between PC and the projector.
The selected system displays in the PC system menu.
Video Signal Input
The projector can display one of the following:
• Auto—The projector selects the display resolution automatically. If the video system is PAL-M
or PAL-N, select the system manually.
• PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/PAL60—
when the image cannot be displayed correctly in Auto
Video displays in the PC system menu.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
Manually set the color system
.
Menu items
37