Dynamic Mode(Lwu505St-Aps Only); Setting - Christie APS Series User Manual

• Cinema
• Blackboard (Green)
• Colorboard
• User image

Dynamic mode(LWU505ST-APS only)

Automatically perform light source adjustment and signal compensation from the image to produce the best
contrast imag.
• The projector light source automatically turns off if the input image is all black when the Mode2
and Mode3 options are selected. The projector light source automatically turns on if the
projection image appears.
1. Select to select Dynamic mode menu.
2. Select OK.
3. Select to select required item.
4. Select OK.
• Off—The dynamic contrast function is disabled.
• Mode1—Adjusts the light source to a lesser degree.
• Mode2—Adjusts the light source to a moderate degree.
• Mode3—Adjusts the light source to a greater degree.

Setting

Use the Setting function to select other functions as described below.
LWU605ST-APS
1. Select Menu > Setting menu.
2. Select to select required item.
3. Select OK.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
LWU505ST-APS
Menu items
39