Factory Default; Memory Viewer Settings - Christie APS Series User Manual

a. Select the MENU on remote control or the top control panel, select
Select the OK or
b. Select
•
•
c. Select
and select OK to confirm.
d. Select
e. Select OK to enter an IP address.
f. Select
g. Select OK to confirm.

Factory default

Reset all your settings to factory default .
• When the Factory default is executed, all settings are restored to the factory settings in addition
to the user logo selection, logo password lock, logo password lock, Outside of the light source
usage time.
• When the confirmation screen is displayed, selecting the MENU key cancels the Factory Set.
1. Select to select the Factory default menu.
2. Select OK.
3. Select to select YES.
4. Select OK.

Memory Viewer settings

Select the Memory Viewer function can project images stored in USB memory, when you insert the USB
memory into the projector.
• When selecting Memory Viewer as the input signal, the Memory Viewer menu is available.
APS Series User Manual
020-002086-01 Rev. 1 (05-2023)
Copyright 2023 Christie Digital Systems USA, Inc. All rights reserved.
©
If printed, please recycle this document after use.
.
select Network setting and select OK to enter.
MAC address—Display the MAC address of wired network.
IP address—Display the IP address of wired network.
to set DHCP On to obtain an IP address, subnet, gateway, and DNS automatically,
to set DHCP Off.
to select subnet , gateway and DNS automatically.
Menu items
to select Expand.
55