Replacing A 500 Watt Power Supply Module; Figure 35. Replacing A Power Supply Module - Intel SE7501WV2 - Server Chassis - SR2300 Product Manual

Replacing a 500 Watt Power Supply Module

The 500 Watt redundant power supply system consists of the power supply bay and either one or
two power supply modules. The optional second module provides a redundant, 1+1 system.
CAUTION
If you do not have the second, redundant power supply module, you must
take the server out of service before replacing the single module.
1. Squeeze the module handle to depress the latch (Figure 35, A) that is the right side of the
handle.
2. Rotate the handle down (B) while pulling the module toward you (C). As you pull the module
out, support the module with your free hand.
3. Insert a new power supply module in the bay.
4. Grip the module handle, rotate it down, and push the module into the bay.
5. When the module is nearly all of the way in, the handle will rotate up. At this time, push firmly
on the front of the handle to lock the latch.
6. The power supply module is now functional and the power supply fault indicator should
not be lit.
Working Inside Your Server

Figure 35. Replacing a Power Supply Module

A
B
C
OM14114
53