cytiva AKTA readyflux Operating Instructions Manual page 90

Moving when unpacked
ÄKTA readyflux can be rolled by hand on hard and level surface with wheel brakes
released. If the floor quality does not allow rolling the ÄKTA readyflux system on its own
wheels, it can be moved with a pallet jack or fork lift.
Note:
Before moving ÄKTA readyflux, make sure that:
• The power supply to ÄKTA readyflux is switched off.
• All power cords to ÄKTA readyflux are disconnected.
• All air supply lines to ÄKTA readyflux are disconnected.
• All process lines to ÄKTA readyflux are disconnected, and no fluids are present in the
process lines.
• All communication cables to ÄKTA readyflux are disconnected.
ÄKTA readyflux Operating Instructions 29175550 AG
WARNING
Heavy object. Because of the significant weight of the product,
great care must be taken not to cause squeezing or crushing inju-
ries during movement. At least two, but preferably three or more,
people are recommended when moving the product.
Before moving the system, make sure that all openings and apertures that
the system is intended to pass through are large enough to allow passage of
the system when it is lifted from the floor.
4 Installation
4.3 Transport
90