Labels And Symbols - cytiva AKTA readyflux Operating Instructions Manual

2.2

Labels and symbols

Introduction
This section describes the system label and other safety or regulatory labels that are
attached to the product.
Nameplate
The system nameplate is located on the back of the equipment. The nameplate identi-
fies the equipment and shows electrical data, regulatory compliance, and warning
symbols.
The following symbols and text may be present on the nameplate:
Label text
Code Number
Serial Number
Manufacturing
Month/Year
Supply Voltage
Frequency
Max Power
Consumption
Pneumatic Supply
Protection Class
Safety labels
The table below describes the various safety labels that may be found on the product.
ÄKTA readyflux Operating Instructions 29175550 AG
Description
Warning! Read the user documentation before using the
system. Do not open any covers or replace parts unless
specifically stated in the user documentation.
Ordering number for ÄKTA readyflux
System serial number
Month (MM) and Year (YYYY) of manufacture
Supply voltage
Supply voltage frequency
Maximum power consumption
Pneumatic supply pressure requirement
Protection class. Ingress protection according to IEC
60529. This covers the electric cabinet only.
2 Safety instructions
2.2 Labels and symbols
16