cytiva AKTA readyflux Operating Instructions Manual page 154

Step
1
2
Enter registration details
Follow the instructions below for entering the registration details of the flow kit.
Step
1
2
Note:
Prepare the system for flow kit
installation
Follow the instructions below for preparation of the system for flow kit installation.
Note:
ÄKTA readyflux Operating Instructions 29175550 AG
Action
Select the installation type, Quick installation or Step-by-step installa-
tion.
Note:
Quick installation is only recommended for experienced users.
Select the type of flow kit, Flow Kit, and the type of end connector, TC.
Action
Enter the flow kit details manually or with a barcode scanner.
Check that the pump gain factors are correct, see
on page 226.
If Quick installation has been chosen, the wizard will end here, and display
a list of remaining installation steps.
UNICORN must be in ready state.
5 Operation
5.2 Flow kit installation
5.2.4 Install the NFF flow kit
Pump gain factors,
154