cytiva AKTA readyflux Operating Instructions Manual page 172

• A summary of PASS or FAIL results in the AKTA_ready-
flux_test_report_FIT.txt file which is in C:\Program Files
(x86)\Cytiva\UNICORN\UNICORN7.6\Temp folder or at the drive
where UNICORN was installed.
Print a test report
To print the UNICORN test report, go to UNICORN 7.6 (or later version) Evaluation
module. In the File menu, click Report and select the file name containing Instal-
lation Test Flow Kit.
Description of a test report
An installation test report in the Installation Test Flow Kit file contains
the following information.
Report section
Header
Questions
Method notes
Start notes
Run notes
Evaluation notes
Results from installa-
tion test
Comments
ÄKTA readyflux Operating Instructions 29175550 AG
Information
• UNICORN 7 version number
• Name of user who ran the test
• Time and date
• Path of the test report file
Product identification details:
• Bar code of flow kit parts
• pH sensor details
• Protocol for text solution preparation
• Mode for entering codes
• Name of the system
• List of steps that were performed during flow kit
installation
Notes entered in the Start Notes panel before the start
of the component test
Notes entered in the Run Notes dialog box during the
component test
Notes entered after the component test is finished. To
view the evaluation notes in UNICORN
ation module and click View →Run Record and click the
Notes tab.
Charts displaying the response over time for each of the
sensors
Space for comments on the paper copy of the report
5 Operation
5.2 Flow kit installation
5.2.5 Flow kit installation test
1
1
, go to the Evalu-
172