Start And Monitor A Method Run - cytiva AKTA readyflux Operating Instructions Manual

5.7.2

Start and monitor a method run

Introduction
This section describes how to start a run using a previously created method and how to
monitor the run. For more information on method creation, see UNICORN Method
manual for your UNICORN software version.
Choose and start a method
The instruction below describes how to open a method and start a run.
Step
1
2
3
4
ÄKTA readyflux Operating Instructions 29175550 AG
Action
Open the System Control module and click the Open Method Navigator
button.
Result:
The Method Navigator pane opens.
Select the method to run, and click the Run button.
Result:
The Start Protocol dialog opens.
Step through the displayed pages in the Start Protocol, add requested
input and make appropriate changes if necessary. Click Next.
Click Start on the last page of the Start Protocol.
5 Operation
5.7 Perform a run
5.7.2 Start and monitor a method run
201