Associated Documentation - cytiva AKTA readyflux Operating Instructions Manual

1.3

Associated documentation

Introduction
This section describes the user documentation that is delivered with the product, and
how to find related literature that can be downloaded or ordered from Cytiva.
User documentation
The user documentation listed in the table below is available in printed, PDF, or elec-
tronic Help format.
Documentation
ÄKTA readyflux Operating Instructions
(29175550)
ÄKTA readyflux Site Preparation Guide
(29178995)
ÄKTA readyflux Unpacking Instructions
(29178997)
Hardware Product Documentation
binders
UNICORN 7.6 (or later version) docu-
mentation package
ÄKTA readyflux Software Guide
(29296551)
ÄKTA readyflux Workflow Phases Binder
(29253906)
Pump Upgrade Kit for ÄKTA readyflux
Instructions for Use (29723633)
ÄKTA readyflux Operating Instructions 29175550 AG
1.3 Associated documentation
Main contents
Instructions needed to install, operate
and maintain the system in a safe way.
Information needed to prepare the site
for installation and use of the system.
Contains a checklist as a feedback tool
to the Cytiva personnel prior to installa-
tion of the system.
Instructions on how to unpack the
system upon arrival.
Documents that include hardware
specifications.
Overview and detailed descriptions of
the system control software for
ÄKTA readyflux. The manuals cover the
process picture map for real time moni-
toring, the method editor, as well as the
evaluation and administration modules.
Instructions on how to use the software.
Schematic representations of the
different workflow phases available for
ÄKTA readyflux.
Instructions on how to install the pump
upgrade kit for the feed pump, to enable
the use of the ÄKTA readyflux system
with ¼ inch flow kits for low flow rate
applications.
1 Introduction
8