cytiva AKTA readyflux Operating Instructions Manual page 181

Step
7
Note:
ÄKTA readyflux Operating Instructions 29175550 AG
Action
If applicable, for the XDM S UF mixer, make sure that the following Compo-
nents types are selected as listed below, see
nents, on page 97.
For the feed:
• Feed Mixer (XD1) and Feed Mixer Options →XDM S UF (XD1)
• Select the appropriate size under Feed Mixer (XDM S UF) Size
• Feed Mixer (XDM S UF Options) →Mixer Control
• Feed Mixer (XDM S UF Options) →Conductivity
• Feed Mixer (XDM S UF Options) →pH
• Feed Mixer (XDM S UF Options) →Temperature
Note:
Agitator speed control is available. During agitator speed control, Pause and
End in UNICORN 7.6 (or later version) stops agitation.
Initialize the XDUO or XDM S UF mixer first before connecting to and
starting a run on ÄKTA readyflux.
5 Operation
5.3 Bag installation
5.3.2 3D bag (XDUO or XDM S UF mixer)
Select instrument compo-
181