cytiva AKTA readyflux Operating Instructions Manual page 223

Customer I/O
Problem
Incorrect weight
Air in flow path is not detected
ÄKTA readyflux Operating Instructions 29175550 AG
Corrective action
• Make sure that the weighing scale is properly connected to the
system connector. See
on page 45 for weighing scale connection instructions.
• Weight range or offset is set incorrectly. Set weight range or
offset correctly in Settings or instruction.
• Make sure that the AE-152 air sensor is properly connected to
the customer I/O connector. See
connectors, on page 45
tions.
• Enable AE-152 in system settings.
Section 3.3.4 CUSTOMER I/O connectors,
Section 3.3.4 CUSTOMER I/O
for customer I/O connection instruc-
7 Troubleshooting
223