cytiva AKTA readyflux Operating Instructions Manual page 148

Step
2
3
4
Note:
ÄKTA readyflux Operating Instructions 29175550 AG
Action
Insert the O-ring into the tube ends and align the tube ends.
Note:
Use an O-ring with a compatible size to avoid high backpressure.
Apply a standard plastic sanitary clamp, a disposable TC clamp, or a stainless
steel sanitary clamp to the connector assembly for connection.
Repeat for filter and feed bag connections.
Always operate the system with the feed bag connected to feed and reten-
tate lines. Valves closure during E-Stop, run END or power cycle resets the
valves to default open/close positions with a valid flow path centered on feed
bag.
5 Operation
5.2 Flow kit installation
5.2.3 Install the CFF flow kit
148