Stratasys J826 User Guide
6. In the following screen, select Replace faulty heads, and click Next.
Preparing the Print Block
7. Select the print head(s) needing replacement, and click Next.
DOC-28000 Rev. I
Figure 4-90 Procedure selection screen
Figure 4-91 Head selection screen
The printer heats and empties the print block, and prepares the printer.
(This should take up to 15 minutes.)
The following screen appears when the printer is ready for you to replace
print heads.
Figure 4-92 Printer ready for head replacement
4 Operating and Maintaining the Printer
4-68