Stratasys J826 User Manual page 90

Stratasys J826 User Guide
8. Make sure that the build tray is clear and clean, and confirm this in the
9. When the following screen appears, open the printer and tape a sheet of
DOC-28000 Rev. I
wizard screen.
Figure 4-78 Preparing for head optimization (1)
When you click Next, a frame is printed on the build tray.
pink paper to the surface left of the build tray.
Figure 4-79 Preparing for head optimization (2)
When you click Next, the Pattern Test is printed on the pink paper.
4 Operating and Maintaining the Printer
4-60