Table of Contents
Advertisement
Stratasys J826 User Guide
8. Clean the orifice plates, with a back-and-forth motion. Use the mirror to
Once a month, remove and clean the print-head splash shield. (See step 4
on page 4-56.)
9. Using the supplied cleaning sponge, clean the glass lens on both UV
10. Using the alcohol-soaked cleaning cloth, remove any material remaining on
11. Remove any pieces of waste material collected in the purge unit. If
DOC-28000 Rev. I
make sure that you have removed all of the residue material.
Figure 4-46 Cleaning the heads
lamps.
the wiper and the surrounding area.
necessary, remove the waste collector to clean it. Wipe the rubber seal.
Figure 4-47 Removing the purge unit waste collector
4 Operating and Maintaining the Printer
4-41
Advertisement
Table of Contents
