Table of Contents
Advertisement
Stratasys J826 User Guide
3. In the Material Replacement Options screen, Both cartridges is selected
DOC-28000 Rev. I
for each position. To print with only one of the cartridges, clear the check
box and then select either the left (L) or the right (R) cartridge.
Figure 4-22 Manual cartridge selection
When printing in High Speed mode (three materials), the same material is
used in both sections of each print head. The material selected for one of
the cartridge slots is also used in the other print head channel.
Figure 4-23 Manual cartridge selection—3 model Materials
4 Operating and Maintaining the Printer
4-22
Advertisement
Table of Contents
