Table of Contents
Advertisement
Stratasys J826 User Guide
5. Place the test-pattern transparency face up on the scanner platen, with the
6. Place the A4 sheet of black plastic, glossy-side down, on top of the
7. Close the scanner lid.
8. At the bottom of the scanner interface, click Preview.
DOC-28000 Rev. I
arrows aligned with the black rail (under the glass), and the edge marked
'This Face Up - A' along the bottom edge of the scanner glass (closest to
you).
Make sure that the bottom edge of the transparency is at the border of the
platen.
Figure 4-178
Placing the transparency on the scanner - side A
transparency. Do not move the transparency.
Figure 4-179 Scanner interface, showing Preview and Scan buttons
4 Operating and Maintaining the Printer
4-117
Advertisement
Table of Contents
