Terms Used In This Guide - Stratasys J826 User Manual

Stratasys J826 User Guide

Terms Used in This Guide

Build tray In the print preparation application: The surface displayed on the screen
that represents the actual build tray in the printer.
In the printer: The substrate for 3D printing.
Cleaning fluid Cleanser for flushing material feed tubes and the printing block, used to
completely remove model and support material from the system before
loading another type of material in the printer and before long-term
shutdown. The cleaning fluid is supplied in material cartridges.
Client/user The workstation on which software is installed for preparing build trays
workstation
for production on PolyJet printers. (There is no limit to the number of
client workstations.)
GrabCAD Print A software application for preparing print jobs on a variety of 3D printers,
including J826 printers.
Mixed part 3D prints that are produced using more than one model material.
Mixed tray A build tray containing 3D prints, each designed to be printed using a
different model material.
Model material Material used for building the 3D prints.
Printer The computer inside the J826 printer that operates it.
computer
Printer The GUI (graphical user interface) used for controlling J826 printers.
interface
Printer Software running on the computer in the J826 printer, controlling all
software,
printer operations.
printer-control
application
Resin
The base substance from which photopolymer printing materials are
made for use in Stratasys PolyJet printers.
STL
A file used for printing 3D models.
Support
Material used for supporting the structure of models during production.
material
DOC-28000 Rev. I
1 About This Guide
1-5