Stratasys J826 User Manual page 44

Stratasys J826 User Guide
4. Choose the configuration for producing 3D prints:
DOC-28000 Rev. I
❒ 7 Materials (High Mix / High Quality)
❒ 3 Materials (High Speed)
❒ Single Material (Super High Speed)
Figure 4-11 Material Replacement Options
7 Materials
Each print head is loaded with two different materials.
Figure 4-12 Seven model materials loaded in the print heads
You can print with any single material, or with a combination of them. High-
speed printing is not available, but high-quality 3D prints can be produced.
4 Operating and Maintaining the Printer
4-14