Stratasys J826 User Manual page 104

Stratasys J826 User Guide
22. In the Replace print heads screen, select the check box to confirm that you
23. With your fingers, make sure that the new head is level and even with the
24. Confirm that the heads are level by selecting the check box in the following
DOC-28000 Rev. I
have replaced the head(s), and click Next.
Figure 4-102 Head replacement confirmation
other heads.
Figure 4-103 Checking the level of the new head
wizard screen, and click Next.
Figure 4-104 Installation-check screen
4 Operating and Maintaining the Printer
4-74