Table of Contents
Advertisement
Stratasys J826 User Guide
11. Using the polyurethane tube provided in the kit, push the new UV lamp bulb
12. Twist the tube by 180° (a), and continue to insert the UV lamp bulb into the
DOC-28000 Rev. I
into the UV reflector. Make sure that the tip on the bulb is facing the
direction of the top of the reflector.
Figure 4-159 Pushing the new UV bulb into the UV reflector
UV reflector (b). Make sure that the tip on the bulb is facing the direction of
the opening of the reflector.
Figure 4-160 Twisting the tube and inserting the UV lamp bulb
4 Operating and Maintaining the Printer
4-106
Advertisement
Table of Contents
