Table of Contents
Advertisement
Stratasys J826 User Guide
Warning: Broken UV lamp hazard
UV lamps contain mercury. Deal with broken lamps with caution.
l
l
l
l
17. Insert the UV reflector unit into the housing, next to the print block.
18. Replace the UV lamp cover by inserting it into the slot on the bottom of the
DOC-28000 Rev. I
Ventilate the room thoroughly.
Use protective gloves when collecting mercury and lamp components.
Remove spilled mercury with a method that prevents the generation of
mercury vapor, such as a syringe, packing tape or paper.
Place the broken lamp, mercury and contaminated materials in an air-tight,
non-metallic container.
Figure 4-163 Print block and UV lamp assembly, showing correct
placement of black strip
housing, and tighten the securing screw on top.
Figure 4-164 Replacing the UV lamp cover
4 Operating and Maintaining the Printer
4-108
Advertisement
Table of Contents
