Table of Contents
Advertisement
Stratasys J826 User Guide
Note: Do not disconnect the power connection to the cooling fans.
6. Loosen the screw securing the UV lamp cover (A), and pull the cover up
7. Pull the UV reflector out of the UV housing.
8. Using a 2.5-mm hex key, remove the UV lamp clamp (2 screws).
DOC-28000 Rev. I
(B), then out (C).
Figure 4-154 Removing the UV lamp cover
Figure 4-155 Removing the UV lamp reflector
Figure 4-156 Removing the UV lamp clamp
4 Operating and Maintaining the Printer
4-104
Advertisement
Table of Contents
